Go to [Settings] > [Invoicing] > [Printers]. Click [+] here to add a new printer.
To use the matrix printer, you need the Crossuite Connector plugin. Follow this article to install the plugin: Install Crossuite Connector
The first time you use an OKI printer, its settings need to be changed. You can follow this guide for that: Setting up an OKI matrix printer
Click the empty bar under [Printer]. The available printers are shown. Select the correct printer.
[Pins] Choose how many pins the matrix printer has.
The EPSON LQ models have 24 pins; the EPSON LX and OKI models have 9 pins.
The top and left margins can still be changed afterwards if the print isn't positioned quite right. The margins below are often used for these brands:
EPSON: Top: 0 Left: 0
OKI: Top: -14 Left: 3
[Instant print] skips the panel for selecting a printer when printing.
If you have several matrix printers, it can be useful for this panel to appear so you can select the correct printer.
If you use a different matrix printer per colleague or location, you can still use instant print. You then set this up via the presets.
[Print crosses] adds crosses to fill the empty boxes on the testimonial.
Click [Create] to add the printer configuration.
Go to [Settings] > [Invoicing] > [Presets]. Click [+] here to add a new configuration.
Choose a title and select 'Kineo' under [Specializations] so the extra options for the matrix printer become available. Then select 'Testimonial' under [Invoice type]. Adjust the other conditions and scroll down to select the templates.
Tick the correct template under Numbering templates, or click [+] to add a new numbering. Select the correct model under Invoice document template; you can find it on the right of the testimonial itself. Tick the correct configuration under Printer configuration and click [Create] at the bottom right.
Follow this article to add a new numbering: Set up invoice numbering
See also: Create a testimonial
Go to the patient's EPR. Register the treatments and tick them in the treatment list. At the top of the treatment list, click [Create testimonial].
Click [Create & print] at the bottom. The testimonial is printed.
Go to Settings > Invoicing > Printers. Click the pencil icon next to the configuration to edit it.
Adjust the top and left margins depending on the print position. The change is confirmed in a pop-up at the top right. The left margin can't be set to a negative value; in that case, you need to change the position of the testimonial in the printer using the tractor feeds.